7200emu.hacki.at

jumpieva · Joined: 13 Nov 2007 Posts: 8

ok guys, maybe i'm an idiot Smile

i've seen several requests for atm help and most people direct them to the switch config area. I already have my switch configured. The problem is configuring the routers themselves. I'm using 7206 npe-200 with c7200-ik2s-mz.121-27b.bin IOS. The problem is, using cisco's atm config help for PA-A1 at: http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/cfig_nts/4010atmw/4010conf.htm

the commands don't work quite right in the dynamips. especially the map-list
command. So can someone help me out or point me in the direction of a lab
where you got atm to work? i have 4 7206 routers connected to an atm switch.

i'll attach the .net file. thanks Smile

ryan

p.s. where in the heck is this all_configs.txt thing or whatever i keep seeing referenced? i can't find it!

jumpieva · Joined: 13 Nov 2007 Posts: 8

oh yea here's a pic:

jumbo · Joined: 18 Sep 2006 Posts: 860 Location: slovakia

the all_configs.txt is in tutorial dir

mathew791 · Joined: 09 Apr 2011 Posts: 218

The commands don't work quite right in the dynamips. especially the map-list
command. So can someone help me out or point me in the direction of a lab
where you got atm to work? i have 4 7206 routers connected to an atm switch.
____________________
Web Design
Website Design