7200emu.hacki.at Forum Index 7200emu.hacki.at
Dynamips, Dynagen and all that stuff
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
7200emu.hacki.at Forum Index

hackibr>

Unable to load NM-16ESW in 3640

 
Post new topic   Reply to topic    7200emu.hacki.at Forum Index -> dynamips on mac
View previous topic :: View next topic  
Author Message
ajayprk



Joined: 10 Mar 2008
Posts: 9

PostPosted: Wed Mar 26, 2008 9:51 am    Post subject: Unable to load NM-16ESW in 3640 Reply with quote

I am stuck again. My net file references the module NM-16ESW in 3640 routers. Dynagen does not seem to like this and does not show me any interfaces on this router.

Rack1R8#sh ip int brie
Interface IP-Address OK? Method Status Protocol

Please help.

Regards,
Ajay Prakash
Back to top
View user's profile Send private message
crissa



Joined: 23 Nov 2007
Posts: 792
Location: Dortmund, Germany

PostPosted: Wed Mar 26, 2008 10:04 am    Post subject: Re: Unable to load NM-16ESW in 3640 Reply with quote

ajayprk wrote:
I am stuck again. My net file references the module NM-16ESW in 3640 routers. Dynagen does not seem to like this and does not show me any interfaces on this router.

Rack1R8#sh ip int brie
Interface IP-Address OK? Method Status Protocol



Hello,
try another IOS for your 3640 or another model (3660, 3725).

The NM-16ESW modul doesn't work with all IOS versions. You need at least 12.2(2), see <http://www.cisco.com/en/US/docs/ios/12_2t/12_2t8/feature/guide/ft1636nm.html>.
BYe, Tore

_________________
- <read the dynamips/dynagen tutorial> - use <search> before you post - <visit my dynamips/dynagen page> -
Back to top
View user's profile Send private message Visit poster's website
ajayprk



Joined: 10 Mar 2008
Posts: 9

PostPosted: Wed Mar 26, 2008 10:40 am    Post subject: Re: Unable to load NM-16ESW in 3640 Reply with quote

crissa wrote:
ajayprk wrote:
I am stuck again. My net file references the module NM-16ESW in 3640 routers. Dynagen does not seem to like this and does not show me any interfaces on this router.

Rack1R8#sh ip int brie
Interface IP-Address OK? Method Status Protocol



Hello,
try another IOS for your 3640 or another model (3660, 3725).

The NM-16ESW modul doesn't work with all IOS versions. You need at least 12.2(2), see <http://www.cisco.com/en/US/docs/ios/12_2t/12_2t8/feature/guide/ft1636nm.html>.
BYe, Tore


Thanks again Tore Smile I'll download and try a different IOS and will post my results here.
Back to top
View user's profile Send private message
ajayprk



Joined: 10 Mar 2008
Posts: 9

PostPosted: Wed Mar 26, 2008 12:12 pm    Post subject: Re: Unable to load NM-16ESW in 3640 Reply with quote

ajayprk wrote:
crissa wrote:
ajayprk wrote:
I am stuck again. My net file references the module NM-16ESW in 3640 routers. Dynagen does not seem to like this and does not show me any interfaces on this router.

Rack1R8#sh ip int brie
Interface IP-Address OK? Method Status Protocol



Hello,
try another IOS for your 3640 or another model (3660, 3725).

The NM-16ESW modul doesn't work with all IOS versions. You need at least 12.2(2), see <http://www.cisco.com/en/US/docs/ios/12_2t/12_2t8/feature/guide/ft1636nm.html>.
BYe, Tore


Thanks again Tore Smile I'll download and try a different IOS and will post my results here.


Downloading a new IOS solved one problem but created another. Sad I am now able to install NM-16ESW module but now this new image is only giving me 4 idlepc values and all 4 of them make no difference to the CPU utilization. The previous image gave 10 idlepc values and worked fine. How do I find the best idlepc value now. My cpu is reaching 50% now with just 1 instance of 3640. The idlepc values that the system now reports is

=> idlepc get R3
Please wait while gathering statistics...
1: 0xffffffff80009edc [29]
2: 0x604e2a24 [36]
3: 0x60505230 [21]
4: 0xffffffff87ff783c [60]
Potentially better idlepc values marked with "*"


Thanks,
Ajay
Back to top
View user's profile Send private message
eltech



Joined: 01 Mar 2008
Posts: 60

PostPosted: Wed Mar 26, 2008 1:25 pm    Post subject: Reply with quote

hate to say it Rolling Eyes Try yet again another IOS..
_________________
----

eltech

Check out #gns3 & #gns3-labs on Freenode IRC

http://www.GNS3-Labs.com :: Share & Trade GNS3 Topologies!
Back to top
View user's profile Send private message
thumpercisco



Joined: 28 Jun 2007
Posts: 889
Location: Chesapeake, VA

PostPosted: Wed Mar 26, 2008 1:34 pm    Post subject: Reply with quote

can you post version dynamips used, .net config, and specify IOS image
thanks

_________________
"AIaO"

ThumperCisco


Back to top
View user's profile Send private message
hkr_7878



Joined: 17 Dec 2009
Posts: 3

PostPosted: Thu Dec 17, 2009 9:47 pm    Post subject: Reply with quote

I have IOS version 12.2(5) and still don't support BNM-16ESW modular
please help
Back to top
View user's profile Send private message
mathew791



Joined: 09 Apr 2011
Posts: 217

PostPosted: Tue Jun 07, 2011 2:44 am    Post subject: Reply with quote

I am now able to install NM-16ESW module but now this new image is only giving me 4 idlepc values and all 4 of them make no difference to the CPU utilization. The previous image gave 10 idlepc values and worked fine.
________________
Roller Blinds
Blinds
Back to top
View user's profile Send private message
benton672



Joined: 19 May 2011
Posts: 12

PostPosted: Mon Jun 13, 2011 11:15 am    Post subject: Reply with quote

Anyone able to compile the source code from dynamips-0.2.8-RC2 under Snow Leopard and put the result up as a download?
___________________________________
Comment Poster

_________________
benton672
Back to top
View user's profile Send private message Yahoo Messenger
learningccna



Joined: 19 Aug 2011
Posts: 3

PostPosted: Fri Aug 19, 2011 11:41 am    Post subject: Reply with quote

hkr_7878 wrote:
I have IOS version 12.2(5) and still don't support BNM-16ESW modular
please help


that IOS also run ok on my PC






______________________
home solar panels
Accident Injury Attorney
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    7200emu.hacki.at Forum Index -> dynamips on mac All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


 


Powered by phpBB © 2001, 2005 phpBB Group