7200emu.hacki.at Forum Index 7200emu.hacki.at
Dynamips, Dynagen and all that stuff
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
7200emu.hacki.at Forum Index

hackibr>

localhost problem

 
Post new topic   Reply to topic    7200emu.hacki.at Forum Index -> dynagen
View previous topic :: View next topic  
Author Message
nealcali



Joined: 12 Jul 2007
Posts: 2

PostPosted: Thu Jul 12, 2007 7:04 pm    Post subject: localhost problem Reply with quote

i try to run this lab but my problem is that i could not run it becuase it take problem from localhost.my sample lab is as follows.

###############################################################################
#
# Internetwork Expert Routing & Switching topology mappings for dynamips/dynagen
# by: Brian McGahan, CCIE #8593
# bmcgahan@internetworkexpert.com
#
# For more information:
# Dynamips: http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator
# Dynagen: http://dyna-gen.sourceforge.net/
# Hacki’s Forum: http://hacki.at/7200emu/index.php
# Internetwork Expert's Forum: http://forum.internetworkexpert.com
#
###############################################################################

##################################################
#
# Define global router parameters for instance 1
#
##################################################
autostart=false
[localhost:7200]

workingdir = C:\Program Files\Dynamips\sample_labs\internetworkexpert\working

[[3640]]
#
# Specify 3640 IOS image on Windows here:
image = C:\Program Files\Dynamips\images\boot.this.3640.ios.bin
#
# Specify 3640 IOS image on Linux here:
# image = /ios/c3640-jk9o3s-mz.123-14.T7.extracted.bin
#
ram = 128
disk0 = 0
disk1 = 0
# Choose an idlepc value from the below
idlepc = 0x60530870
# idlepc = 0x60530890
# idlepc = 0x60530a58
# idlepc = 0x60530abc
# idlepc = 0x605310c4
# idlepc = 0x605e92e8
# idlepc = 0x605e9364
# idlepc = 0x60531394
# idlepc = 0x605313d0
# idlepc = 0x605313ec
mmap = true

###########################
#
# Define router instances
#
###########################

[[Router R1]]
model = 3640
autostart = false
slot0 = NM-1FE-TX
slot1 = NM-4T
F0/0 = SW1 F1/1
S1/0 = FRSW 1
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R1.initial.config.txt

[[Router R2]]
model = 3640
autostart = false
slot0 = NM-1FE-TX
slot1 = NM-4T
F0/0 = SW1 F1/2
S1/0 = FRSW 2
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R2.initial.config.txt

[[Router R3]]
model = 3640
autostart = false
slot0 = NM-4E
slot1 = NM-4T
S1/0 = FRSW 3
S1/1 = FRSW 13
S1/2 = R1 S1/1
S1/3 = R2 S1/1
E0/0 = SW1 F1/3
E0/1 = SW2 F1/3
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R3.initial.config.txt

[[Router R4]]
model = 3640
autostart = false
slot0 = NM-4E
slot1 = NM-4T
E0/0 = SW1 F1/4
E0/1 = SW2 F1/4
S1/0 = FRSW 4
S1/1 = R5 S1/1
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R4.initial.config.txt

[[Router R5]]
model = 3640
autostart = false
slot0 = NM-4E
slot1 = NM-4T
E0/0 = SW1 F1/5
E0/1 = SW2 F1/5
S1/0 = FRSW 5
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R5.initial.config.txt

[[Router R6]]
model = 3640
autostart = false
slot0 = NM-4E
slot1 = NM-4T
E0/0 = SW1 F1/6
E0/1 = SW2 F1/6
S1/0 = FRSW 6
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\R6.initial.config.txt

[[Router SW1]]
model = 3640
autostart = false
slot1 = NM-16ESW
F1/13 = SW2 F1/13
F1/14 = SW2 F1/14
F1/15 = SW2 F1/15
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\SW1.initial.config.txt


##################################################
#
# Define global router parameters for instance 2
#
##################################################

[localhost:7201] # Talk to the 2nd dynamips process on port 7201
udp = 11000 # Change the base udp port to 11000 (the default is 10000)

workingdir = C:\Program Files\Dynamips\sample_labs\internetworkexpert\working

[[3640]]
#
# Specify 3640 IOS image on Windows here:
image = C:\Program Files\Dynamips\images\boot.this.3640.ios.bin
#
# Specify 3640 IOS image on Linux here:
# image = /ios/c3640-jk9o3s-mz.123-14.T7.extracted.bin
#
ram = 128
disk0 = 0
disk1 = 0
# Choose an idlepc value from the below
idlepc = 0x60530870
# idlepc = 0x60530890
# idlepc = 0x60530a58
# idlepc = 0x60530abc
# idlepc = 0x605310c4
# idlepc = 0x605e92e8
# idlepc = 0x605e9364
# idlepc = 0x60531394
# idlepc = 0x605313d0
# idlepc = 0x605313ec
mmap = true


###########################
#
# Define router instances
#
###########################

[[Router SW2]]
model = 3640
console = 2007
autostart = false
slot1 = NM-16ESW
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\SW2.initial.config.txt

[[Router BB1]]
model = 3640
console = 2008
autostart = false
slot1 = NM-4T
S1/0 = BB3 S1/0
S1/1 = FRSW 21
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB1.initial.config.txt

[[Router BB2]]
model = 3640
console = 2009
autostart = false
slot0 = NM-4E
E0/0 = SW2 F1/10
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB2.initial.config.txt

[[Router BB3]]
model = 3640
console = 2010
autostart = false
slot0 = NM-4E
slot1 = NM-4T
E0/0 = SW1 F1/10
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\BB3.initial.config.txt

[[Router TermServ]]
model = 3640
console = 2012
autostart = false
#
# Specify your local host's loopback here from the network device list
# Too add a loopback in windows:
# http://support.microsoft.com/kb/839013
#
# E0/0 = NIO_gen_eth:\Device\NPF_{4065B11C-2A6C-4FD2-8204-A12A9A8328A4}
cnfg = C:\Program Files\Dynamips\sample_labs\internetworkexpert\initial.configs\TermServ.initial.config.txt

[[FRSW FRSW]]

# R1 to FRSW
1:102 = 2:201
1:103 = 3:301
1:113 = 13:311
1:104 = 4:401
1:105 = 5:501

# R2 to FRSW
2:203 = 3:302
2:213 = 13:312
2:204 = 4:402
2:205 = 5:502

# R3 to FRSW
3:304 = 4:403
3:305 = 5:503
13:314 = 4:413
13:315 = 5:513

# R4 to FRSW
4:405 = 5:504

# R6 to FRSW
6:51 = 21:51
6:100 = 21:100
6:101 = 21:101
6:201 = 21:201
6:301 = 21:301
6:401 = 21:401



dynagan.JPG
 Description:
the erroe message
 Filesize:  56.94 KB
 Viewed:  2337 Time(s)

dynagan.JPG


Back to top
View user's profile Send private message
darkplayer



Joined: 28 Jan 2007
Posts: 23

PostPosted: Thu Jul 12, 2007 7:48 pm    Post subject: Reply with quote

I had to change [localhost:7200] to [127.0.0.1] for my lab to work.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    7200emu.hacki.at Forum Index -> dynagen All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


 


Powered by phpBB © 2001, 2005 phpBB Group